• 
  Large Beaker Autosampler
  

Beaker Autosamplers

The Beaker Autosamplers may be connected to QC-Titrate™ or PC-Titrate™ systems. Analysis of the sample is completed directly in the sample cups. A variety of sample cups may be used including 50ml tubes and 300ml beakers. The probe holder used in the system is dictated by the sample cup selected and by the number of electrodes required. For example, when analyzing in 50ml centrifuge tubes, only one 12mm electrode may be accommodated. However, in a 125ml sample cup, either the 2- or 3-electrode probe holder may be used.

• True X,Y,Z random access, robotic autosamplers completely controlled by the software (no keypads required)
  
  • define sample rack positions within sample table or method
  • define different arm travel heights for separating conductivity measurements
  • from other electrodes - define travel only over unanalyzed samples
  
  
• Large unattended runs, e.g. operates overnight analyzing multiple parameters in the same
  batch run
• Active IntelliRinse™ system with the ability to set values (e.g. rinse to a user-specified
  conductivity value) or to adjust rinse intensity based on previous concentration, before moving onto the next sample, e.g. if sample concentration was high - use 3 rinse routines vs. only 2
• Define multiple rinse stations for aggressive rinsing, for example, a combination of
  solvent and water rinses to clean electrodes of oil and automatically re-hydrate the
  electrode before the next sample
• Define batch sizes larger than rack size since new samples may be added in place of
  analyzed samples
  

Standard Beaker Autosampler

Probe Holder 3 types available to hold: 1 stirrer, 2 electrodes, 1 thermistor & 5 dispense tips OR 1 stirrer, 3 electrodes, 1 thermistor & 4 dispense tips OR 1 stirrer, 1 electrodes, 1 thermistor & 1 dispense tips Custom probe holders available

Standard Rack Includes: 73 x 50ml sample tubes OR 40 x 120ml sample cups OR 30 x 125ml sample cups OR 18 x 300ml beakers

Standard Rack Includes: 122 x 50ml sample tubes OR 62 x 120ml sample cups OR 47 x 125ml sample cups OR 23 x 300ml beakers

Rack with Beakers Additional rinse stations may be added: 1,2,3,4,5... or as many as required

Standard Rack Includes: 197 x 50ml sample tubes OR 97 x 120ml sample cups OR 77 x 125ml sample cups OR 44 x 300ml beakers